Baileigh DP-1500VS Variable Speed Drill Press

Baileigh Drill Press-DP-1500VS  Variable Speed Pillar drill, Auto feed and Auto reverse for tapping 

A must for any fabrication shop that requires accurate drilling and tapping facilities.

The Inverter driven head allows for variable spindle speed from 85 to 2000rpm with digital readout for precise setting. Tools that run at correct speeds last much longer. Precise settings cannot be achieved with gear and pulley drive machines.

This variable speed machine has manual and a 3 speed power feed system.

The inbuilt tapping facility has a a variable depth setting which can be set so when the spindle reaches the depth stop, the motor and spindle reverse direction to unwind a tap from a hole.

• The base and table are made from a very rigid casting adding to the strength of this 38mm maximum capacity drilling machine. Industrial quality 38mm capacity drill press,
• Inverter driven variable speed spindle
• Digital RPM readout 
• Utilises a No. 4 Morse Taper spindle taper
• Column diameter of 115mm for extra rigidity
• Auto reverse tapping feature
• Manual feed 
• 3 speed auto feed
• Variable height table
• Integrated coolant system
• Tapping mode as standard
• 220v, 1 phase, 50 HZ

Specification:

• Drill Capacity in Steel: 38mm, Cast Iron: 38mm
• Tapping Capacity: 24mm
• Spindle Speed: High 245 – 2000rpm / Low: 85 – 540rpm
• Swing: 533mm
• Spindle Taper: MT4
• Spindle Travel: 152mm
• Spindle Nose to Table: 584mm, Base: 1041mm
• Quill Diameter: 76mm
• Quill Feed (3 speeds): .0078”4.52"/rpm, .004”/rpm, .002”/rpm
• Column Diameter: 114mm
• Table Dimensions (L/W): 559 / 465mm
• Table Slot: 16mm
• Base Dimensions (L/W): 686 / 483mm
• Motor Main: 1.47Kw
• Motor Coolant: 0.92Kw
• Power Requirements: 220 volt / 1 Phase
• Dimensions (L/W/H): 1016 / 635 / 2108mm
• Weight: 409kg